Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Chesapeake?
Most garage door repairs in Chesapeake run $150 – $600, and a spring repair (the most common call we get) is typically $180 – $340 for a single spring. A new door installation is a bigger project, usually $700 – $2,200 depending on door size, material, and whether the opener and hardware are replaced at the same time. Every price here is a typical estimate for the Chesapeake market, and the written quote you get before any work starts is the number that counts.
Garage Door Cost Breakdown (2026)
Here’s what the main jobs cost around Chesapeake this year. These are estimated ranges, not a flat-rate menu, because a door that’s simply off its track is a different job from a door with a snapped torsion spring and a bent bottom section.
| Service | Typical Estimated Cost |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
Two springs sit on most doors, and a matched pair gets replaced together. That means a two-spring job usually costs about twice the single-spring range, so budget closer to $360 – $680 when both need to go. We don’t quote one spring price and then swap the pair on you; the estimate spells out how many springs and why.
What pushes a job toward the top of a range? A cracked or bent panel that needs a replacement section, a heavy insulated door, a rusted track that has to come out, or a repair that turns into an opener replacement. What keeps it near the bottom? A single worn roller set, a car that bumped the safety sensor out of line, or a remote that just needs reprogramming. We work from the actual failure, not a default package.
If you want a same-day visit for a door that’s stuck open or jammed shut, call us and we’ll book you in. We don’t charge extra for the call-out during that first conversation, and the estimate is free.
What Affects Garage Door Pricing in Chesapeake
- The type of spring on your door. Torsion springs mounted on the header above the door and extension springs that run along the sides are different jobs with different parts, so a spring repair price reflects which system is on your door, not a flat number.
- Door weight and material. A steel single-car door is the lightest and cheapest to work on. Insulated double doors, wood-look carriage doors, and anything with a large glass panel cost more to repair and to replace, because the hardware has to carry more weight.
- Brand and opener platform. A LiftMaster, Chamberlain, Genie, or Craftsman opener has its own logic board, limit switch, and safety sensor wiring. We diagnose the specific platform rather than reaching for a universal part, which keeps a repair a repair instead of a swap.
- Whether it’s a repair or a replacement. Sometimes a bent track and two broken panels add up to more than a new door. We’ll tell you when that’s the case, but only after looking at the whole system, not just the part that failed.
- Condition of the surrounding hardware. Cables, rollers, hinges, and the bottom bracket work as a set. If the cables are frayed while the springs are being replaced, doing both in one visit usually costs less than two separate trips.
- Access and height. A standard seven-foot door in an open two-car garage is quick to reach. A low-clearance ceiling, a very tall door, or a tight side clearance changes how long a repair takes and what equipment the technician needs.
How to Save on Garage Door
The single biggest money-saver is fixing the actual failure instead of replacing the whole door. A door with one snapped spring still has a perfectly good set of panels, and a door that won’t close because a sensor is misaligned doesn’t need a new opener. Start with a diagnostic, not a sales pitch.
- Fix the cause, not the symptom. A door that reverses for no reason is usually a sensor or a limit setting, not a dead motor. Testing before replacing keeps a $120 – $320 opener repair from turning into a $250 – $550 installation.
- Bundle related work into one visit. If the springs are being replaced, having the technician check the cables and rollers while they’re in there avoids paying for a second trip later.
- Don’t ignore a small problem. A loose track or a worn roller left alone can wear the panels and cables around it, turning a $110 – $220 roller job into a larger repair.
- Get the estimate in writing before work starts. That’s how you compare one quote to another honestly, and it’s how you know exactly which parts are being replaced.
- Ask us what’s actually needed. Free estimates are part of how we work. Call (855) 522-0573 and we’ll walk you through the options before anything is ordered.
Repair or Replace? A Straight Answer
As a rule, a door with one broken component is worth repairing. Springs, cables, rollers, tracks, and openers are all serviceable parts, and fixing them is almost always cheaper than a new door. Replacement starts to make sense when the door itself is failing structurally: a bent or rusted-through bottom section, multiple cracked panels, a door that’s pulled away from its hinges, or a system so worn that several repairs together cost more than a new install.
We don’t push replacement when a repair will do. If a technician diagnoses a broken spring, you get a spring repair quote. If, after looking at the door, they think the panels are too far gone to hold new hardware, you’ll hear that too, with the reason. That’s the difference between a diagnostics-first service and a one-brand dealer who only knows how to sell a new door.
Spring Repair: Why the Price Reflects Real Risk
Spring repair is the most dangerous job in this trade, and the pricing reflects it. A torsion spring under load stores enough energy to cause serious injury, which is why we don’t hand homeowners a step-by-step and send them up a ladder. If you suspect a broken spring, keep the door closed, don’t force it, and call a trained technician. This is one place where the professional price is the safe price.
Our technicians have up to 15 years of experience with both torsion and extension systems, and they’ll tell you up front whether one spring or the matched pair needs replacing. A single spring is $180 – $340; a pair runs about twice that. If you’re not sure what’s wrong, we’ll diagnose it and quote before any part is ordered.
Brand-Specific Work and What It Means for Your Bill
Garage door systems from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor all have their own parts, wiring, and quirks. A technician who works across all eight can spot the difference between a limit switch failure on a Chamberlain and a logic board fault on a Genie, and can source the right part the first time. That matters for your final bill, because a correct diagnosis on the first visit is cheaper than two visits with the wrong part.
It also means you don’t get steered toward a single manufacturer’s replacement because that’s all the company stocks. Whether your door is a Clopay steel model or a Wayne Dalton with a Raynor opener, the approach is the same: find the fault, quote the fix, and only recommend a replacement when the door genuinely needs one. You can read more about the full scope of what Garage Door Repair Norfolk Pros handles if you want the bigger picture on repair, installation, and emergency response.
When to Call for Emergency Service
A broken or stuck garage door is often urgent, not just inconvenient. If the door is jammed open, it leaves the house exposed. If it’s jammed shut, the car is trapped and the whole day is off. We treat those calls as emergency service, with same-day availability for urgent situations, because a door that won’t close is a security problem as much as a mechanical one.
If a door fails and you’re not sure whether to wait or call, call. We’d rather tell you it can wait than have you force a door that’s under spring tension. Same-day emergency service is a real option, not a line on a brochure.
FAQs – Garage Door Cost in Chesapeake
How much does a garage door repair cost in Chesapeake?
Most garage door repairs in Chesapeake run $150 – $600, with the exact price depending on what failed. A single spring repair is typically $180 – $340, a cable repair $130 – $250, and an opener repair $120 – $320. Call (855) 522-0573 for an exact quote – estimates are free.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper unless the door itself is failing. A single broken spring, cable, roller, or opener is a serviceable part, and fixing it costs a fraction of a new door. Replacement starts to win when several panels are cracked or bent, or when the repair total climbs toward the $700 – $2,200 installation range. Call (855) 522-0573 and we’ll tell you which side of that line your door is on.
How much does a new garage door installation cost in Chesapeake?
A new door installation typically runs $700 – $2,200 in Chesapeake, and that figure covers the door and hardware. Adding or replacing the opener pushes it toward the higher end, since opener installation is its own $250 – $550 job. Call (855) 522-0573 for a free estimate on your specific door size and material.
Can you come today for a broken garage door?
Yes, same-day emergency service is available for urgent situations like a door stuck open or jammed shut. A snapped spring at 7 AM is exactly the kind of call we take. Call (855) 522-0573 and tell us what the door is doing – we’ll book you in.
How much does it cost to replace both springs?
A matched pair of springs costs about twice the single-spring range, so expect roughly $360 – $680 when both are replaced together. Springs usually fail as a pair because they’ve taken the same cycles. Call (855) 522-0573 for an exact quote – estimates are free.
Pricing reflects the Chesapeake market as of 2026. Garage Door Repair Norfolk Pros offers free estimates – call (855) 522-0573.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Todd Anderson"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Todd Norris"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Jerome Bryant